 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A DESCRIPTION The 5533/5534 are dual and single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths. This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) If very low noise is of prime importance, it is recommended that the 5533A/5534A version be used which has guaranteed noise specifications. PIN CONFIGURATIONS NE/SA/SE5534/5534A D, FE, N Packages BALANCE INVERTING INPUT NON-INVERTING V1 2 3 4 TOP VIEW 8 7 6 5 BALANCE/ COMPENSATION V+ OUTPUT COMPENSATION NE5533/5533A N Package INV INPUT A 1 14 BAL COMP A 13 COMP A 12 OUTPUT A 11 V+ 10 OUTPUT B 9 8 TOP VIEW COMP B BAL COMP B FEATURES NON-INV INPUT A 2 BALANCE A 3 V- 4 BALANCE B 5 NON-INV B 6 INV B 7 * Small-signal bandwidth: 10MHz * Output drive capability: 600, 10VRMS at VS=18V * Input noise voltage: 4nV Hz * DC voltage gain: 100000 * AC voltage gain: 6000 at 10kHz * Power bandwidth: 200kHz * Slew rate: 13V/s * Large supply voltage range: 3 to 20V APPLICATIONS * Audio equipment * Instrumentation and control circuits * Telephone channel amplifiers * Medical equipment ORDERING INFORMATION DESCRIPTION 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) TEMPERATURE RANGE 0 to +70C 0 to +70C 0 to +70C 0 to +70C 0 to +70C 0 to +70C 0 to +70C 0 to +70C -40C to +85C -40C to +85C -55C to +125C -55C to +125C -55C to +125C -40C to +85C ORDER CODE NE5533N NE5533AN NE5534D NE5534FE NE5534N NE5534AD NE5534AF NE5534AN SA5534N SA5534AD SE5534N SE5534AF SE5534AN SA5534AN 0404B 0404B 0404B 0404B 0174C 0404B 0404B 0174C DWG # 0405B 0405B 0174C August 31, 1994 114 853-0222 13721 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A ABSOLUTE MAXIMUM RATINGS SYMBOL VS VIN VDIFF TA Supply voltage Input voltage Differential input voltage1 Operating temperature range SE SA NE TSTG TJ PD Storage temperature range Junction temperature Power dissipation at 25C2 16D Pkg 16N Pkg 8D Pkg 8FE Pkg 8N Pkg Output short-circuit duration3 TSOLD Lead soldering temperature (10sec max) 1350 1500 750 800 1150 Indefinite 300 C mW mW mW mW mW -55 to +125 -40 to +85 0 to +70 -65 to +150 150 C C C C C PARAMETER RATING 22 V supply 0.5 UNIT V V V NOTES: 1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6V. Maximum current should be limited to 10mA. 2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance: 8-pin ceramic DIP 150C/W 8-pin plastic DIP 105C/W 8-pin plastic SO 160C/W 16-pin plastic DIP 80C/W 16-pin plastic SO 90C/W 3. Output may be shorted to ground at VS=15V, TA=25C. Temperature and/or supply voltages must be limited to ensure dissipation rating is not exceeded. August 31, 1994 115 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A DC ELECTRICAL CHARACTERISTICS TA=25C, VS=15V, unless otherwise specified. 1, 2, 3 SYMBOL VOS Offset voltage VOS/T IOS Offset current IOS/T IB Input current IB/T ICC VCM CMRR PSRR AVOL Supply current per op amp Common mode input range Common mode rejection ratio Power supply rejection ratio Large-signal voltage gain RL600, VO=10V Over temperature RL600 Over temperature RL600, VS=18V RL2k Over temperature 50 25 12 10 15 13 12 50 Over temperature 12 80 13 100 10 100 13 12 16 13.5 12.5 100 38 50 25 15 12 10 15 13 12 30 Over temperature 5 4 6.5 9 12 70 Over temperature 200 400 800 1500 5 4 13 100 10 100 13 12 16 13.5 12.5 100 38 100 8 10 Over temperature 5 10 200 500 200 500 1500 2000 PARAMETER TEST CONDITIONS SE5534/5534A Min Typ 0.5 Max 2 3 5 20 300 400 NE5533/5533A NE/SA5534/5534A Min Typ 0.5 Max 4 5 mV mV V/C nA nA pA/C nA nA nA/C mA mA V dB V/V V/mV V/mV V V V V V k mA UNIT VOUT Output swing RIN ISC Input resistance Output short circuit current NOTES: 1. For NE5533/5533A/5534/5534A, TMIN = 0C, TMAX = 70C 2. For SE5534/5534A, TMIN = -55C, TMAX = +125C 3. For SA5534/5534A, TMIN = -40C, TMAX = +125C August 31, 1994 116 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A AC ELECTRICAL CHARACTERISTICS TA=25C, VS=15V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS AV=30dB closed-loop f=10kHz, RL=600, CC=22pF Voltage-follower, VIN=50mV RL=600, CC=22pF, CL=100pF 20 20 VIN=50mV, RL=600 CC=47pF, CL=500pF tR AV GBW SR Rise time Overshoot Gain Gain bandwidth product Slew rate Power bandwidth f=10kHz, CC=0 f=10kHz, CC=22pF CC=22pF, CL=100pF CC=0 CC=22pF VOUT=10V, CC=0 VOUT=10V, CC=22pF VOUT=14V, RL=600 CC=22pF, VCC=18V 50 35 6 2.2 10 13 6 200 95 70 50 35 6 2.2 10 13 6 200 95 70 ns % V/mV V/mV MHz V/s V/s kHz kHz kHz 20 20 ns % SE5534/5534A Min ROUT Output resistance Typ 0.3 Max NE5533/5533A NE/SA5534/5534A Min Typ 0.3 Max UNIT Transient response tR Rise time Overshoot Transient response ELECTRICAL CHARACTERISTICS TA=25C, VS = 15V, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS Min fO=30Hz VNOISE Input noise voltage fO=1kHz fO=30Hz INOISE Input noise current fO=1kHz Broadband noise figure Channel separation f=10Hz-20kHz, RS=5k f=1kHz, RS=5k 110 0.6 0.4 0.9 110 pA/Hz dB dB 4 2.5 3.5 1.5 4.5 nV/Hz pA/Hz 5533/5534 Typ 7 Max Min 5533A/5534A Typ 5.5 Max 7 nV/Hz UNIT August 31, 1994 117 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A EQUIVALENT SCHEMATIC 1 8 5 7 2 3 6 4 August 31, 1994 118 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A TYPICAL PERFORMANCE CHARACTERISTICS Open-Loop Frequency Response 120 TYPICAL VALUES 16 VS = +15V CC 12 CC = 0 GAIN (dB) 40 CC = 22pF S 8 (V/s) TYP 0 4 0 40 5 8 GAIN (dB) 20 CC = 0; RF = 9k; RE = 1k Slew Rate as a Function of Compensation Capacitance Closed-Loop Frequency Response 60 TYPICAL VALUES CC = 0; RF = 10k; RE = 100 80 CC = 22pF; RF = 1k; RE = -40 10 102 103 104 105 106 107 f (Hz) 0 0 40 80 CC(pF) -20 103 104 105 106 107 f (Hz) 108 Large-Signal Frequency Response 40 VS = +15V TYPICAL VALUES 30 CC = 0pF 22pF 47pF 60 80 Output Short-Circuit Current 1,4 VS = +15V 1,2 Input Bias Current VS = +15V (V) Vo(p-p) 20 IO (mA) 40 TYP II (A) 0,8 TYP 10 20 0,4 0 102 103 104 105 106 107 0 -55 0 -25 0 25 50 TA (oC) 75 100 +125 -55 -25 0 25 50 TA (oC) 75 100 +125 f (Hz) Input Commom-Mode Voltage Range 30 TYPICAL VALUES 6 Supply Current per Op Amp 102 IO = 0 TYP 10 Input Noise Voltage Density 20 VIN (V) 10 NEG IP IN 4 TYP (nV 2 Hz) 1 POS (mA) 10-1 0 0 10 Vp; -VN (V) 20 0 0 10 20 Vp; -VN (V) 10-2 10 102 103 f (Hz) 104 August 31, 1994 119 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Input Noise Current Density 102 106 105 Total Input Noise Density TYPICAL VALUES 102 Broadband Input Noise Voltage TYPICAL VALUES 10 Vn(rms) In(rms) (pA Hz) 1 (nV TYP 104 103 102 10 10 10Hz 1kHz Vn(rms) (V) 1 200Hz TO 4kHz THERMAL NOISE OF SOURCE RESISTANCE 10-1 10Hz TO 20kHz Hz) 10-1 1 10-1 10 102 103 f (Hz) 104 10-2 10 10-2 10-2 102 103 104 105 106 RS () 0 10 RS () 20 TEST LOAD CIRCUITS V+ CC 22k 100k 8 2 CC 3 1 2 5 7 6 5533 (1/2) 5534 VI RE 100pF 600 8 RS 25 5533 (1/2) 5534 + 5 6 RF + 3 4 V- Frequency Compensation and Offset Voltage Adjustment Circuit Closed-Loop Frequency Response August 31, 1994 120 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A NOISE TEST BLOCK DIAGRAM CAL OSC POWER SUPPLY +VCC -VCC CAL METER BANDPASS AT 1kHz + DUT 10k +40dB 100 TEST BOARD GND BANDPASS AT 30Hz (nV Hz) 1 (nV Hz) August 31, 1994 121 |
Price & Availability of NE5534AF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |